enphase IQ8AC Installation And Operation Manual page 29

Compatibility
Dimensions (without mounting brackets)
DC connector type
Weight
IP Rating
Torque specifications for fasteners
(Do not over torque)
Cooling
Relative Humidity range
Approved for wet locations
Altitude
Pollution degree
Standard Warranty Term
Compliance
Earthing
Monitoring
Communication
29
IQ8MC/IQ8AC/IQ8HC Installation and Operation Manual
IQ8AC-72-M-INT Microinverter parameters
Features and specifications
IQ8AC-72-M-INT Microinverter parameters
© 2023 Enphase Energy Inc. All rights reserved.
54-cell/108-half-cell, 60-cell/120-half-cell, 66-
cell/132-half-cell, 72-cell/144-half-cell
212 mm (8.3") x 175 mm (6.9") x 30.2 mm (1.2")
Stäubli MC4
1.1 kg
Outdoor - IP67
•
6 mm mounting hardware: 5 N m
•
8 mm mounting hardware: 9 N m
Natural convection - no fans
4% to 100% (condensing)
Yes
< 2600 m
PD3
http:/ /enphase.com/warranty
Grid compliance:
G98, G99, G100
Safety:
EN IEC 62109-1, EN IEC 62109-2
EMC:
EN IEC 61000-3-2, 61000-3-3, 61000-6-2,
61000-6-3, EN IEC 50065-1, 50065-2-1
EN55011 (At STC within MPP range)
The DC circuit meets the requirements for
ungrounded PV arrays. Ground fault protection
(GFP) is integrated into the class II double-
insulated microinverter
Enphase Installer Platform and Enphase App
monitoring options. Both options require an IQ
Gateway
Power line communication (PLC)
September 2023
IOM-00029-1.0