Omron NT30C-ST141-E Operation Manual page 243

Alarm Lists
Example of Alarm List Display
S Image/library Data Corresponding to Alarm Messages
Apart from alarm messages, image/library data can also be set for bit memory
table entries. The alarm list is composed of touch switches and touching
(pressing) an alarm message will display the corresponding image/library data
for your guidance.
In this example, if the temperature in a water tank rises above the upper limit, a bit
is turned ON, and the alarm message corresponding to it is displayed.
S NT-series Support Tool Settings
The following settings are made using the NT-series Support Tool.
Bit memory table entry No. 20: IR/CIO 001512
Bit memory table entry No. 21: IR/CIO 000407
Bit memory table entry No. 22: AR 000000
Bit memory table entry No. 23: LR 001003
Bit memory table entry No. 24: LR 001004
Data registered for the screen: Alarm list
Alarm list
Starting bit table entry number: 20
Number of accessed table entries: 5
S PC Program
Ladder programming to control the NT30/30C is not required.
Section
Y
B
Image/library data display area
5-5
231