Selecting The Automatic Reset Function - Omron NT30C-ST141-E Operation Manual

Setting Communications with the PC Using Memory Switches

3-5-4 Selecting the Automatic Reset Function

88
The Automatic Reset memory switch is used to set whether or not the commu-
nication is automatically reset after the occurrence of a communication error.
The factory setting has been made to exist.
Select the baud rate of the communication with the PC by the menu operation
from the System Menu shown below.
[ SYSTEM MENU ]
Quit
Transmit Mode
Maintenance Mode
[ MAINTENANCE MENU ]
Quit
Display History
I/O Check
PT Settings
Init. Memory
< MEMORY SWITCH >
Key Press Sound ON
Buzzer Sound ON
Screen Saver 10min
None
Resume Memory Table
Printer ESC/P MONO.
< MEMORY SWITCH >
Comm. Port RS232C
Comm. Method Host Link
Baud Rate 9600
None
Automatic Reset
To set and quit the menu, press the Quit touch switch. The settings made last will
be set and the display will return to the Maintenance Menu.
S None: If a communication error has occurred, corresponding error mes-
sage is displayed and the operation stops.
Select "Maintenance Mode."
Select "Memory Switch."
Memory Switch
Select "Next."
Quit
Next
Each time the Automatic Re-
Prev.
Quit
set touch switch is pressed,
the setting option "Exist" alter-
nates with "None."
Section 3-5