Omron NT30C-ST141-E Operation Manual page 170

Touch Switches
158
Screen Number in the Range 0 Set
Menu Screen
Operation 1
Operation 2
Menu Screen
Operation 1
Operation 2
Only a touch switch can have the screen switchover return key function. If display
of screen number 0 is specified from the PC, the screen will go blank.
The number of screens that can be returned using the screen switchover return
key is a maximum of 32 screens. However, it is assumed that the screen switch-
over return key has been set to all screens to be returned.
Screen switchover
S Instructed by the PC
S Screen switchover key
Touch switch is pressed
Section 4-7
Screen number 0 is set
to the touch switch 1.
Previous screen