Omron NT30C-ST141-E Operation Manual page 187

Pop-Up Window Function
Window Screens and Display Elements
Reference
• By registering multiple screen switching keys (touch switches), menus for
screen switching can be created.
MENU
Press here
MENU
Using the pop-up window function, windows can be created in the screens num-
bered 1900 to 1979 (note that a screen for which a window is registered is called
a window screen). Screens other than these cannot be opened as windows.
Screen after creating a window in the screen number range 1900 to 1979, specify
the window area (display area). The window will then open in a display area of the
specified size and at the specified position.
The following elements can be displayed in NT30/30C windows. If elements oth-
er than these are registered on a window screen, they will not be displayed when
the window opens.
• Background color screen attribute (NT30C only)
• Fixed displays
• Touch switches (but the input notification and screen print functions cannot be
used)
• Numeral/character string input setting fields (only one can be used)
Elements that project beyond the display area will not be displayed when the win-
dow opens. Similarly, display elements on the base screen that overlap even
partly with the window will be deleted when the window opens.
S Since the pop-up window function and screen print function share the same
memory area, it is not possible to open a window during screen printing. Con-
versely, a screen cannot be printed while a window is open.
S The display elements in a window cannot be notified to the PC. This means
that the lamp bits of touch switches in windows cannot be controlled.
S While a window is open, display processing may be slightly delayed.
MENU
When "Graph" is pressed
MENU
Section 4-10
Graph
Next
When "Next"
is pressed
175