Omron NT30C-ST141-E Operation Manual page 175

Numeral Setting
Thumbwheels
Using a Touch Panel
Displayed in the numeral
setting input column
1234
1 2 3
Enter
4 5 6
7 8 9
A numeral value is entered using the
numeric key in the screen.
Using a B7A Unit
Displayed in the numeral
setting input column
1234
Enter
B7A Unit
By means of touch switches that can be increased/decreased every digit of nu-
meral value, a numeral value can be entered from the numeral setting input co-
lumn. Every time a numeral value displayed is changed, the numeral value dis-
played is written into the numeral memory table entry and simultaneously notified
to the PC.
Therefore, the thumbwheel type can perform an entry of numeral value only by
creating the numeral setting input column on a screen.
Each time the -- key is touched, a numeral
value decreases by 1.
-- -- -- --
1 2 3 4
+ + + +
Each time the + key is touched, a
numeral value increases by 1.
NT30/30C
Writing
1234
Numeral memory table
entry
When the key is pressed, an input value is
written in the numeral memory table entry and
simultaneously notified to the host.
NT30/30C
Writing
1234
Numeral memory table entry
When the key is pressed, an input value is
written in the numeral memory table entry and
simultaneously notified to the PC.
NT30/30C
Writing
1234
Numeral memory table entry
Each time the + or -- key is touched, an input
value is written into the numeral memory table
entry and simultaneously notified to the PC.
Section 4-8
Notifying
PC
Notifying
PC
Notifying
PC
163