Omron NT30C-ST141-E Operation Manual page 132

Creating and Transmitting Screen Data
120
Open command. The creation screen for screen number 1 will also be dis-
played.
6. From the Application Manager, the screen to be edited can be designated,
screens can be copied, and memory tables can be edited.
The following tables can be edited:
• Numeral memory table: Numeral Memory Table (page 138)
• Character string memory table: Character String Memory Table (page
136)
• Bit memory table: Bit Memory Table (page 140)
• Expanded I/O: 4-12 Operation of B7A Unit (page 185)
• Mark table: Marks (page 126)
• Image table: Image Data (page 126)
• Library table: Library Data (page 127)
Refer to the NT-series Support Tool for Windows Operation Manual for infor-
mation on I/O comments.
7. The numbers of the screens that have been registered will be displayed. Se-
lect "Properties" from the Screen Menu to set the screen attributes. The fol-
lowing screen attributes can be set:
• History: No, Yes
• Backlight: Light, flash, or color
• Buzzer: None, Cont (continuous sound), Long (long intermittent sound),
Short (short intermittent sound)
• Local 1 Keyboard: Don't display or window screen number for display
• System Keypad: Use or don't use
• Back Col
Note Back Col. (background color) can be set only when using an NT30C.
The backlight color can be set for the NC30.
Section 4-1