Omron NT30C-ST141-E Operation Manual page 111

System Settings
< MEMORY SWITCH >
Key Press Sound ON
Buzzer Sound ON
Screen Saver 10min
None
Resume Memory Table
Printer ESC/P COL.
To set and quit the menu, press the Quit touch switch. The setting made last will
be set and the display will return to the Maintenance Menu.
ESC/P COL.: Specify this for a printer, such as the EPSON ESC/P Printer
(24-pin), that conforms to the printer control standard
ESC/P24-J83C. Hard copies will be made in colors.
PR201H COL.: Specify this for a printer that conforms to the control standard
for the PC-PR201H made by NEC. Hard copies will be made
in colors.
ESC/P MONO.: Specify this for a printer, such as the EPSON ESC/P Printer
(24-pin), that conforms to the printer control standard
ESC/P24-J82. Hard copies will be made in monochrome
with colors expressed by gray scale levels.
PRO201H MONO.:Specify this for a printer that conforms to the control standard
for the PC-PR201H made by NEC. Hard copies will be made
in monochrome with colors expressed by gray scale levels.
Each time the Printer touch
Quit
Next
switch is pressed, the next
item in the applicable cycle of
options below is selected:
ESC/P COL.
ESC/P MONO.
PR201H COL.
PR201H TONE.
Section 3-8
99