Epson Stylus Photo PX700FW Service Manual page 196

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Remove the E-ring.
3.
Remove the torsion spring from the ADF PF Roller, and remove the ADF PF
4.
Roller from the ADF Frame Unit in the direction of the arrow.
ADF PF Roller
E-ring
Figure 4-202. Removing the ADF PF Roller (3)
When installing the ADF PF Roller, attach the leg of the torsion
spring on the ADF PF Roller as shown in
After replacing or removing the ADF PF Roller, be sure to perform
� � � � �
� � � �
the required lubrication. (See
�
� � � � �
� � �
DISASSEMBLY/ASSEMBLY
Torsion spring
Fig. 4-202.
Chapter 6 "MAINTENANCE".)
Disassembly Procedures
https://www.manualsbooks.com
Revision C
184
Confidential