Main Frame - Epson Stylus Photo PX700FW Service Manual

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Be careful not to touch or damage the Pick-up Roller so can
adversely affect print quality.
Slide the Pick-up Roller in the direction of the arrow, and remove it.
2.
Pick-up Roller
Figure 4-103. Removing the Pick-up Roller (2)
When replacing the Pick-up Roller, make sure to carry out the
� � � � �
� � � �
specified lubrication. (See
�
� � � � �
� � �
DISASSEMBLY/ASSEMBLY
Chapter 6 "MAINTENANCE".)
Disassembly Procedures
https://www.manualsbooks.com

4.2.4.11 Main Frame

Parts/Components need to be removed in advance:
ADF Unit (Artisan 800/PX800FW/TX800FW only)/Scanner Unit/Upper Left
Housing/Paper Guide Top Assy/Upper Housing/Rear Left Housing/Left Housing/
Decoration Belt/Hinge/Rear Right Housing /Right Housing/Power Supply Unit/
Rear ASF Paper Guide Cover/Lower ASF Paper Guide Assy/CDR Tray Assy/
Main Board/CSIC Assy/Wireless LAN Board /Cartridge Box Unit/Ink Supply
Tube Assy/Card Slot Assy/Decompression Pump Unit/Waste Ink Tray Assy
Removal procedure
Since the Main Frame consists of several frames, it may deform
when lifting it. When lifting the Main Frame, it is recommended to
hold the positions shown in
Figure 4-104. Holding positions of Main Frame
Revision C
Fig. 4-104.
Holding positions
Confidential
144