M.2 Assembly; Removing The M.2 Assembly - HP Cloudline CL2100 G3 806R User And Maintenance Manual

M.2 assembly

Removing the M.2 assembly

Follow these steps to remove the M.2 assembly:
Power off the server, and then detach all of the power cords from the power supplies.
1.
Remove the access panel (on page 41).
2.
Remove the riser card (on page 49).
3.
Disconnect the SATA cable from the M.2 assembly.
4.
Remove the screws securing the M.2 assembly to the system board.
5.
Remove the M.2 assembly.
6.
Remove the screws securing the M.2 card.
7.
Rotate the M.2 card out and remove.
8.
Installation 53