Installing the DIMM module
The system board includes 16 (four DIMM channels per processor) DIMM slots for the installation of DDR4
1866/2133 MHz DIMMs.
Follow these steps to install the DIMM module:
Pull the locking latches of the DIMM slot outward.
1.
Place the DIMM module into the socket so the notch and obstruction are aligned.
2.
Press the edge connector of the DIMM module into the slot. Press down firmly so that the locking
3.
latches of the DIMM slot are levered upwards to secure the DIMM module.
Install the access panel (on page 41).
4.
Installation 38