Riser Card; Removing The Riser Card - HP Cloudline CL2100 G3 806R User And Maintenance Manual

Align the SSD cage with the slot on the chassis and slide in place.
5.
Connect the SSD cable to the system board.
6.
Install the access panel (on page 41).
7.

Riser card

Removing the riser card

Follow these steps to remove the riser card:
Power down the server and detach all of the power cords from the power supplies.
1.
Remove the access panel (on page 41).
2.
Disconnect the riser assembly from the system board.
3.
Installation 49