Table of Contents
Advertisement
Station Programming
Prime Line Preference — Outgoing (Assignment)
When you go off-hook to make a call, you are connected to a line assigned as the prime line
automatically.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
1
Dial 1.
The display shows the current status.
<PT Display Example>
Pref.Out:ICM
— To exit the Station Programming mode: Press [PROGRAM].
Note
• If your PT is DN type, then you cannot select "ICM."
Nonstop servis
volejte dispečink tel.
PanaTEL
komunikační systémy Panasonic
www.PanaTEL.cz
94
3
Press the desired line access
Dial 3.
button.
(Selection)
ICM, S-CO, G-CO, L-CO, PDN, SDN
( When ICM is selected)
TELEFONNÍ ÚSTŘEDNY
606 193 950
je specialistou na telefonní ústředny ,
®
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
User Manual
Advertisement
Table of Contents
