Table of Contents
Advertisement
Introduction
Who Should Use This Manual
This manual is designed for users of Digital Super Hybrid System KX- TD500. It is to be used
after the system is installed and System Programming is completed. The focus is Digital
Proprietary Telephones (DPTs); KX-T7220/KX-T7230/KX-T7235/KX-T7250/KX-T7420/
KX-T7425/KX-T7431/KX-T7433/KX-T7436, Digital DSS Consoles; KX-T7240/KX-T7440/
KX-T7441, Single Line Telephones (SLTs) and their features. The step-by-step procedures
required to activate each feature are discussed in detail. Illustrations of the KX-TD500 system
and the required System Programming are provided under separate cover in the Installation
Manual and the Programming Guide.
Construction of This Manual
This manual consists of the following sections:
(Section 1) DPT Overview
Provides configuration information on DPTs. It provides an illustration of each telephone,
identifies their feature buttons, supplies background information on these feature buttons, and
provides initial settings.
(Section 2) Station Programming
Provides the steps required to assign features to DPT flexible buttons and to the DPT system.
(Section 3) User Programming
Provides the steps required to assign some features to the system using a PT.
(Section 4) Station Features and Operation (PT/SLT)
Provides background information on the PT features and lists the steps required to activate each
feature.
(Section 5) DSS Console Features
Provides configuration information on the DSS Console. It gives background information on
the DSS Console features and lists the steps required to activate each feature.
(Section 6) Appendix
Provides Display Examples, a Feature Number List, Tone List, and other information are
explained in this section.
Features and Capabilities
The KX-TD500 System is a sophisticated and powerful system that satisfy just what you
expect of an office communication's system. Some of the remarkable features are listed below.
"*" are only available for the KX-7235 and KX-T7436.
• Automatic Callback Busy (Camp-On) informs you when the selected CO line or the
called party becomes idle.
• Call Log, Incoming (— Option) allows you to confirm the incoming CO call
information on the display. You can also call back the caller by selecting one of the
memorized numbers. This feature is available only for the KX-T7230,KX-T7235,KX-
T7433 and KX-T7436.
User Manual
Introduction
7
Advertisement
Table of Contents
