Accessing another program address
After pressing STORE, you can access another program by one of the following two methods:
a)
To go to the next program address:
• Higher program address
<KX-T7200 series>
Press Soft 1 (SKP+) or VOLUME
<KX-T7400 series>
Rotate the Jog Dial clockwise.
• Lower program address
<KX-T7200 series>
Press SHIFT + Soft 1 (SKP-) or VOLUME
<KX-T7400 series>
Rotate the Jog Dial counterclockwise.
b)
To go to a specific program address:
Press END, then enter the program address.
Returning to the operation mode
When the Initial Message: SYS-PGM NO?
(To display the Initial Message, press END.)
Nonstop servis
volejte dispečink tel.
PanaTEL
komunikační systémy Panasonic
www.PanaTEL.cz
User Manual
TELEFONNÍ ÚSTŘEDNY
606 193 950
je specialistou na telefonní ústředny ,
®
(DOWN).
(UP).
is displayed, press the PROGRAM button.
User Programming
113