Table of Contents
Advertisement
User Programming
Programming
Display PT
0
0
6
Dial 006.
<PT Display>
006 CALLER ID #
Repeat these steps
Caller ID Number
Enter a Caller ID Number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new number.
<To end:>
END
Press END.
Conditions
• Up to 1000 Caller ID Codes per tenant, 2000 per system, can be assigned.
• Program [007] "Caller ID Name Set" is used to give names to Caller ID Codes. If an ID
Code is given a name, the called party's telephone shows the name with the ID Code.
Nonstop servis
volejte dispečink tel.
PanaTEL
komunikační systémy Panasonic
www.PanaTEL.cz
132
NEXT
Press NEXT.
<PT Display>
Location NO?→
STORE
Press STORE.
TELEFONNÍ ÚSTŘEDNY
606 193 950
je specialistou na telefonní ústředny ,
®
Enter a location number
(000 through 999).
To enter location number 000,
you can also press NEXT.
<PT Display Example>
000:Not Stored
<To continue:>
[When SELECT is pressed]
NEXT
Enter the desired
PREV
location number
(000 through 999).
SELECT
Press NEXT or
PREV or SELECT.
location no.
location no.
User Manual
Advertisement
Table of Contents
