Table of Contents
Advertisement
DSS Console Features
5.2.17 Single-CO (S-CO) Button (Assignment)
You can assign a DSS button as a Single-CO button.
—Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT and DSS Console
[DSS Console]
[Paired telephone]
(DSS)
Press the desired
DSS button.
<PT Display Example>
CO—
CLR
<PT Display Example>
CO—xxxxx
CLR
To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
—To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You can assign the same CO line to an S-CO and a G-CO button respectively.
• An S-CO button assigned to a DSS button is available for monitoring the call activity only,
not available for making and receiving a call.
Nonstop servis
volejte dispečink tel.
PanaTEL
komunikační systémy Panasonic
www.PanaTEL.cz
522
[Paired telephone]
0
trunk port physical number
Dial 0.
Enter the trunk port physical
number.
(-xxxxx: trunk port physical number)
TELEFONNÍ ÚSTŘEDNY
606 193 950
je specialistou na telefonní ústředny ,
®
[Paired telephone]
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
User Manual
Advertisement
Table of Contents
