Table of Contents
Advertisement
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible (CO, DSS) button as a Single-CO button.
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
PT
Press the desired Flexible
(CO, DSS) button you wish
to assign as an S-CO button.
<PT Display Example>
CO—
CLR
<PT Display Example>
CO—xxxxx
CLR
• To erase an incorrect entry, press the CLR (S2) button or the
TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button in the Station
Programming mode.)
— To exit the Station Programming mode: Press [PROGRAM].
Conditions
• You cannot assign the same CO line to more than one S-CO button on a PT.
• You can assign the same CO line to an S-CO button, a G-CO button and an L-CO button
respectively.
• An S-CO button assigned to a DSS button is available for monitoring the call activity only,
not available for making or receiving a call.
Nonstop servis
volejte dispečink tel.
PanaTEL
komunikační systémy Panasonic
www.PanaTEL.cz
User Manual
0
trunk port physical number
Dial 0.
Enter the trunk port physical
number.
(-xxxxx: trunk port physical number)
TELEFONNÍ ÚSTŘEDNY
606 193 950
je specialistou na telefonní ústředny ,
®
AUTO DIAL
STORE
Press STORE.
• The STORE indicator lights.
• The display shows the initial
programming mode.
Station Programming
77
Advertisement
Table of Contents
