Panasonic KX-TD500BX User Manual page 204

Transferring a call to an external party via a CO or TIE line (Unscreened)
PT and SLT
During a conversation;
TRANSFER
For PT
For SLT
For PT: Press TRANSFER.
For SLT: Flash the switchhook.
The current call is placed on hold.
Conditions
[General]
• Music on Hold or Ringback Tone
If "Music on Hold" is enabled, music is sent to the caller while being transferred. It is
system programmable whether to send a ringback tone or "Music on Hold" to the caller
<Section 2.8 System Option, "Sound source during transfer" in the Programming Guide>.
•
If you mis-dial the destination telephone number, press the FLASH button to clear the
number entered. Then you can enter a new number again.
•
If you want to return to the held call, press the TRANSFER or corresponding CO/
INTERCOM/DN button before the destination party answers the transferred call.
•
If you want to return to the held call, press the switchhook lightly.
[Screened, Unscreened – to Extension]
• One-Touch Transfer by DSS Button (PT only)
Allows the PT user to transfer the outside call (CO, TIE) to an extension simply by pressing
the DSS button associated with the destination extension. This feature can be enabled or
disabled on a system-wide basis by System Programming <Section 2.8 System Option, "25.
Pressing DSS key operation in CO talking" in the Programming Guide>. However, it cannot
be performed when there is another call on Consultation Hold.
• One-Touch Transfer by DSS or Phantom Button (PT only)
Allows the PT user to transfer the call (intercom, CO, TIE) to an extension simply by
pressing the DSS button associated with the destination extension. This feature can be
enabled or disabled on a COS (Class of Service) basis by System Programming <Section
User Manual
(CO)
line access code
Confirmation Press CO or enter
tone and a line access code
dial tone (9 or 77 or 801 through
848).
Station Features and Operation (PT/SLT)
phone no.
Dial the phone Ringback tone
number where
calls will be
transferred.
The call is transferred.
Hang up or press
SP-PHONE/
MONITOR.
207