Group-Co (G-Co) Button; Dss (Direct Station Selection) Button - Panasonic KX-TA308 Operating Instructions Manual

1.2 Proprietary Telephone Settings

Group-CO (G-CO) Button

To use outside (CO) lines efficiently, a group of outside (CO) lines (outside (CO) line group)
can be assigned to a CO button. This button is referred to as Group-CO (G-CO) button. Any
incoming calls from any outside (CO) line in the outside (CO) line group arrive at the G-CO
button. To make an outside call, you can access an idle outside (CO) line in the group by
simply pressing the assigned G-CO button.
PT
CO
Press the programmable button.
!
! • The same line can be assigned as a S-CO button and G-CO button.
• The extension for making and/or receiving calls in outside (CO) line groups must be
programmed.
• When your extension is assigned as the incoming call destination for an outside (CO) line,
you cannot receive any incoming outside calls unless a G-CO, O-CO or S-CO button
associated with the line is assigned.

DSS (Direct Station Selection) Button

PT
Press the programmable button.
• 1.3 Making Calls, "Intercom Calling"
1-10
Operations
Dial #.
CO
MESSAGE
#
outside (CO) line group no.
Enter an outside (CO) line group number
(1 through 6).
1
extension no.
Dial 1. Enter an extension number
(100 through 199).
AUTO DIAL
STORE
Press STORE.
AUTO DIAL
STORE
Press STORE.