Supermicro X6DVA-4G2 User Manual page 11

Quick Reference ( X6DVA-4G2/X6DVA-EG2)
Jumper Description
J13/J15 PCI #1/PCI-X #5,#6 to System SMB
JBT1 CMOS Clear
JPA1 (Note) SCSI Controller Enable
JPA2 (Note) SCSI Channel Term. Enable
JPF Power Force on
JPG1 VGA Enable
JPL1/JPL2 LAN1/LAN 2 Enable/Disable
JPR1 Power Fail Alarm Reset
JWD Watch Dog Enable
Connector
ATX PWR (PW1)
8-pin PWR (PW2)
COM1 (J4)/COM2 (J5)
DIMM 1A-3B (J18-J23)
DS1-DS5, DS7-DS8
DS9
FAN 1-6
GLAN 1/2
IDE1 (J44), IDE2 (J38)
J1
J2
J10
J24
J28
J41
JF1
JF2
JL1
PCI#1/PCI-E#4
PCI#5/PCI#6(J9B1/J8B1) Slot#5: 64-bit PCI-X 100/Slot#6: 64-bit PCI-X 133 slot
PW3
PW4
SATA0/1 (JS0/JS1)
WOL (JWOL)
WOR (JWOL)
USB 0/1 (J3)
USB 2/3
Note: for the X6DVA-4G2 only
Description
Primary 24-pin ATX PWR Connector (Required)
12V 8-pin PWR Connector (Required)
COM1/COM2 Serial Port Connector/Header
Memory (RAM) Slots (1A,1B, 2A,2B, 3A,3B)
Onboard LED Indicators (*See Chapter 2)
DS7/DS8:POST Code LED (*See Chpt.2 & App.A)
System LED (*See Chapter 2)
CPU/Chassis Fan Headers
G-bit Ethernet Ports
IDE1/2 Hard Disk Drive Connectors
VGA Connector
Keyboard/Mouse
Parallel (Printer) Header
Floppy Disk Drive Connector
SCSI Connector (Note)
IPMI 2.0 Socket
Front Control Panel Connector
PWR LED (Pins1-3), Speaker (Pins 5-7)
Chassis Intrusion Header
Slot#1: PCI 32-bit 33MHz/Slot#4: PCI-Ex4 (@2GB/sec)
Power SMB (System Management Bus)
PWR Fail LED
Serial ATA0 Header (JS0), Serial ATA1 Header (JS1)
Wake-on-LAN Header
Wake-on-Ring Header
(Back Panel) Universal Serial Bus Ports
(Front Panel) Universal Serial Bus Headers
1-5
Chapter 1: Introduction
Default Setting
On (Connected)
See Chapter 2
Pins 1-2 (Enabled)
Off (Enable)
Open (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Open (Disabled)
Pins 1-2 (Enabled)