Table of Contents
Advertisement
Chapter 4: AMI BIOS
BIOS Settings Confi guration
Quick Boot
If Enabled, this option will skip certain tests during POST to reduce the time
needed for the system to boot up. The options are Enabled and Disabled.
Quiet Boot
Set this value to allow the boot up screen options to be modifi ed between POST
messages or the OEM logo. The default setting is Enabled. Select Disabled to
allow the computer system to display the POST messages. Select Enabled to allow
the computer system to display the OEM logo.
Add-On ROM Display Mode
Set this option to display add-on ROM (read-only memory) messages. The default
setting is Force BIOS. Select "Force BIOS" to allow the computer system to force
a third party BIOS to display during system boot. Select "Keep Current" to allow
the computer system to display the BIOS information during system boot. The
options are Force BIOS and Keep Current.
Boot up Num-Lock
Set this value to allow the Number Lock setting to be modifi ed during boot up. The
default setting is On. The options are On and Off.
PS/2 Mouse Support
Set this value to allow the PS/2 mouse support to be modifi ed. The options are
Auto, Enabled and Disabled.
Wait for 'F1' If Error
Select Enable to activate the function of Wait for F1 if Error. The options are
Enabled and Disabled.
Hit 'DEL' Message Display
Select Enabled to display the Setup Message when the user hits the DEL key.
The options are Enabled and Disabled.
Interrupt 19 Capture
Select Enabled to allow ROMs to trap Interrupt 19. The options are Enabled and
Disabled.
Quiet Boot Progress Bar
Select Enabled to display a graphic bar that shows the progress of POST if the
feature of Quiet Boot is enabled. The options are Enabled and Disabled.
4-17
Advertisement
Table of Contents
