Table of Contents
Advertisement
Appendix C: Software Installation Instructions
Assigning Array Properties
Once you've create a new array, you are ready to assign the properties to the
array.
*Caution: Once the array is created and its properties are assigned, you cannot
change the array properties using the ACU. You will need to use the Adaptec
Storage Manager - Browser Edition. (Refer to the Adaptec User's Guide in the
enclosed CD.)
To assign properties to the new array:
1. In the Array Properties menu (as shown in the following screen), select an array
type and press Enter.
Note that only the available array types: RAID 0, and RAID1, are displayed on
the screen. (*RAID 0 or RAID 1 requires two drives.)
C-7
Advertisement
Table of Contents
