Table of Contents
Advertisement
32
ENGINE OPERATION
2. Disconnect the linkage of the starter
lock rod.
3. Remove the bolts (3pcs) and remove
the recoil starter.
7
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope clockwise around
the flywheel several turns.
5. Tie a loop to other end of the emer-
gency starter rope and attach socket
wrench that is included in the tool kit.
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
to the stop switch, and attach the
ENOF01828-0
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
7. Set the shift lever in the Neutral posi-
tion.
8. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance, then pull it
quickly.
ENOF01808-0
9. Once the outboard motor is started,
do not reinstall recoil starter and top
cowl.
ENOF01809-0
CAUTION
ENOF01826-0
Advertisement
Table of Contents
