Maximum Length Detection - Kodak i5 50 Series User Manual

Maximum length detection

A-61868 November 2016
This option allows you to override the maximum length detection that is setup
in the scanning application for the scan job. The maximum length detection
allowed is variable and dependent on many factors including the output
resolution and format.
The following chart is a guideline and assumes two-sided scanning with
compressed output.
Scanning DPI
100, 150, 200, 240, 300
400
500
600
NOTES:
• If Controlled Dual Stacking is enabled, the default maximum length
detection will be set to 10 inches for all resolutions.
• For the Kodak i5250V and i5650V Scanners the maximum length detection
is always set to 40 inches and cannot be overridden.
• Setting the maximum length detection longer than is needed may reduce
throughput.
• Feeding a document longer than the maximum length detection will result in
a document jam error.
Resolution = Maximum Length Detection
Black and White = 180 inches
Gray = 180 inches
Color = 58 inches
Black and White = 100 inches
Gray = 100 inches
Color = 32 inches
Black and White = 64 inches
Gray = 64 inches
Color = 18 inches
Black and White = 43 inches
Gray = 43 inches
Color = 13 inches
53