Cleaning The Separation Roller Tires - Kodak i5 50 Series User Manual

Cleaning the separation
roller tires
A-61868 November 2016
4. Pull the separation roller cover forward and remove the separation roller.
NOTE: The separation roller cover is spring-loaded. Hold the separation
roller cover back until you remove the separation roller, then
gently lower the separation roller cover back in place.
5. Manually rotate and wipe the separation roller tires with a roller cleaning
pad. For best results wipe parallel to the ribs in order to remove any
residue between the ribs.
6. Inspect the tires. If the tires show signs of wear or damage, replace the
tires. See "Replacement procedures" on page 104.
7. Reinstall the separation roller by aligning the slots on the separation roller
with the holders.
101