Changing The Dangler Extensions (I5250, I5250V, I5650, I5650V, I5850); Installing The Short Document Adapter - Kodak i5 50 Series User Manual

Changing the dangler
extensions (i5250, i5250V,
i5650, i5650V, i5850)
Installing the short
document adapter
A-61868 November 2016
The scanner comes with a mount and danglers, which can easily be changed
based on the document set you are scanning.
If desired, attach the mount to the top of the scanner. The dangler helps align
the documents as they are deposited in the output tray. Three sizes of the
danglers are available. Depending on the document set you are scanning,
attach the size of the dangler that meets your needs.
NOTE: To change the dangler remove the mount, unclip the dangler, and
snap the desired dangler into the slots as shown.
See "Using the danglers" on page 75 for the i5650S and i5850S scanners.
The short document adapter can be used when scanning small documents
(e.g., checks). This adapter aids in better document stacking.
1. Open the document stop on the output tray as shown in the illustration.
2. Slide the short document adapter over the document stop and push it all
the way down.
3. Adjust the sides guides if necessary.
21