Using The Rear Document Exit - Kodak i5 50 Series User Manual

Using the rear document
exit
A-61868 November 2016
Documents that require special handling (e.g., fragile documents, shipping
envelopes, etc.) can be output using the rear document exit. This exit provides
the straight-through paper path option that allows an exception document(s) to
pass straight through the transport, thus reducing the possibility of a document
jam.
Use the rear document exit when:
• documents are too stiff (e.g., rigid) to make the turn in the transport and are
jamming.
• documents are fragile and you do not want to bend them.
• output stacking order is not important.
• scanning directly into the recycle bin when documents are no longer needed
after scanning.
• scanning photographs.
NOTES:
• Select Rear Exit from the Operator Control Panel.
• Be sure that you have adequate clearance behind the scanner to feed the
document(s) through, when using this option.
• When scanning several documents through the rear document exit, the
documents will be output in the reverse scanning order.
• If you have the Rear Exit Tray Accessory, be sure it is attached. See
"Accessories" on page 2 for more information.
23