Recovering From A Document Jam - Kodak i5 50 Series User Manual

Recovering from a
document jam
A-61868 November 2016
Your scanner can be configured to either Stop Scanning or Pause Scanning
when a document jam occurs.
• If your scanner is configured to Stop Scanning and a document jam occurs,
the scanner will stop. You can clear the jam from the scanner and press the
Scan button in your scanning application to continue scanning.
• If your scanner is configured to Pause Scanning and a document jam
occurs, the scanner will enter the Paused state. You can clear the jam from
the scanner and press the Scan button on the Operator Control Panel. If
you have Indexing, Batching or Printing enabled, the scanner will enter the
Paused state and the following options (depending on what is setup for your
job in the scanning application) will be available on the Operator Control
Panel:
- Adjust Indexing Counters
- Adjust Batch Counter
- Adjust Printer Counter
When any of these screens are displayed, you can adjust the counters from
the Operator Control Panel.
For example, if you have Index: Single Page selected in the scanning
application and you encounter a document jam, you can use the Up and
Down arrows to adjust the index count if needed.
43