Batching
Length monitor
3-24
Batching defines the number of documents of a specified level to
process prior to performing a predefined action.
The batching option is not available.
If you select Batching from the Mode Configuration window, the
following message will appear: Selection is not available.
Press Enter to close the message.
Make another selection from the Mode Configuration window.
Length monitor defines the options required to enable/disable the
document length monitor, set the minimum and maximum document
lengths acceptable, and what action is to be taken when a document
shorter than the minimum length or longer than the maximum length
is fed into the Scanner 5500/7500.
Select Length Monitor from the Mode Configuration window.
Mode Number: 01
Mode Name: MODE01
Mode Configuration
Single
Index Format
6006
IA Field Width
3111
Level Rules
Supprs
IA Display Format
FthenR
Adjoining IA
None
Batching
Off
Length Monitor
Off
Skew Monitor
NA NA
Footswitch
Save & End Session
Save & Prev Menu
The following pages provide instructions on how to define the
document length monitor options. When the length monitor
definitions are complete, you will automatically be returned to this
window.
To close the Length Monitor menu:
Select Previous Menu. Proceed to make any additional mode
configuration definitions.
Item #: 7.0
Patch Reader
Off
COIN2 Port Select
n/a
OCR
n/a
Bar Code Reader
Off
Printr Controller
Supprs
Front Printer
Off
Rear Printer
Off
Mode Name
MODE0
Overrides
No Sav
Don't Save & End Session
Don't Save & Prev Menu
Length Monitor
On/Off
Minimum Length
Maximum Length
Error Response
Previous Menu
A-61074 April 1997