Attaching The Output Tray: I5X50/I5X50V Scanners; Attaching The Output Trays: I5650S/I5850S Scanners; Connecting The Power Cord And Usb Cable: I5250/I5250V/I5650/I5650V/I5650S Scanners - Kodak i5 50 Series User Manual

Attaching the output tray:
i5x50/i5x50V Scanners
Attaching the output trays:
i5650S/i5850S Scanners
Connecting the power cord
and USB cable: i5250/
i5250V/i5650/i5650V/i5650S
Scanners
12
When you unpack the Kodak i5x50/i5x50V Scanner, the output tray is packed
in a separate box.
• Locate the output tray slots on the scanner. Angle the output tray and align
the output tray with the slots, slide it into place and lower it into position.
NOTE: Be sure to lift the output tray up to the scanning position before feeding
documents. See "Adjusting the output tray" on page 19.
Your Kodak Alaris representative will work with you to position the output trays
for your scanning application. Refer to the "Sorting and Stacking" chapter later
in this guide for more information.
After the drivers have been installed, connect the power cord and USB cable to
the scanner. Refer to the illustration below for making proper connections.
Make sure the power outlet is located within 1.52 meters (5 feet) of the
scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the supply of
power cords packed with your scanner.
2. Plug the output power cord into the power port on the scanner. Be sure it is
securely attached.
3. Plug the other end of the power cord into the wall outlet.
4. Attach the USB cable (either USB 2.0 or 3.0) to the scanner USB port.
5. Attach the other end of the USB cable to the proper USB port on your PC.
A-61868 November 2016