Attaching The Output Tray; Connecting The Power Cord And Usb Cable: I5200/I5600/ I5200V/I5600V Scanners - Kodak i5000 Series User Manual

Attaching the output tray

Connecting the power cord
and USB cable: i5200/i5600/
i5200V/i5600V Scanners
A-61670 August 2014
When you unpack the Kodak i5000 Series Scanner, the output tray is packed
in a separate box.
• Locate the output tray slots on the scanner. Angle the output tray and align
the output tray with the slots, snap it into place and lower it into position.
NOTE: Be sure to lift the output tray up to the scanning position before feeding
documents. See the section entitled, "Adjusting the output tray" in
Chapter 3.
After the drivers have been installed, connect the power cord and USB cable to
the scanner. Refer to the illustration below for making proper connections.
Make sure the power outlet is located within 1.52 meters (5 feet) of the
scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the supply of
power cords packed with your scanner.
2. Plug the output power cord into the power port on the scanner. Be sure it is
securely attached.
3. Plug the other end of the power cord into the wall outlet.
4. Attach the USB cable to the scanner USB port.
5. Attach the other end of the USB cable to the proper USB port on your PC.
2-3