Attaching The Output Tray; Connecting The Power Cord And Usb Cable - Kodak i4250 User Manual

Attaching the output tray

Connecting the power cord
and USB cable
2-2
When you unpack the scanner, the output tray is packed in a separate box.
• Locate the output tray slots on the scanner, align the output tray with the
slots and set the output tray in place.
When the drivers have been installed, connect the power cord and USB cable
to the scanner. Refer to the illustration below for making proper connections.
Make sure the power outlet is located within 1.52 meters (5 feet) of the
scanner and is easily accessible.
1. Select the appropriate AC power cord for your region from the supply of
power cords packed with your scanner.
2. Plug the output power cord into the power port on the scanner. Be sure it is
securely attached.
3. Plug the other end of the power cord into the wall outlet.
4. Attach the USB cable to the scanner USB port.
5. Attach the other end of the cable to the Super Speed "SS" port on your
computer. If this port not available, use any USB port.
A-61837 June 2015