Operator Stop Key Selection - Omron VS mini J7 User Manual

Operator stop key selection (n06)
Selects processing when STOP key is pressed during operation from multi-
function input terminal.
Setting Setting
0
STOP key effective when running either from multi-function input terminals
or communications. When STOP key is pressed, the inverter stops
according to the setting of constant n04. At this time, the digital operator
displays "S P" alarm (blinking). This stop command is held in the
inverter until both forward and reverse run commands are open, or
unitl run command from communications becomes zero.
STOP key ineffective when running either from multi-function input
1
terminals or communications.
Description Description
59