Table of Contents
Advertisement
Parcan 64 Short, Incl. Parsafe
Lamp housing
Fig. 02
03) Lamp socket GX16D (230V)
04) Ground/Earth connection
05) Safety cable
06) Fixation ring
07) Power cable
Installation
Remove all packing materials from the Parcan 64 Short. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Installing the Lamp
The Showtec Parcan 64 Short uses the GX16D (ordercode 80107) as manufactured by all popular
manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Ordercode: 30416/30417
8
Advertisement
Table of Contents
