Table of Contents
Advertisement
Parcan 64 Short, Incl. Parsafe
Procedure:
01) Disconnect the Parcan 64 Short from power before installing the lamp.
02) Pull the spring lever in the direction of the arrow and remove the rear cover of the lamp (Fig. 03).
03) Remove the fixation ring by pressing it together (Fig. 04).
04) Remove the lamp from the box and hold it by the base. Read lamp instructions. Do not touch the
lamp bulb glass. Oil on hands shortens the lamp's lifespan. If you touch the bulb glass, wipe it off with
a clean, lint free towel and rubbing alcohol.
05) Pull out the lamp holder and insert the lamp (Fig. 05).
06) Replace the fixation ring (Fig. 06).
07) Replace the rear cover of the lamp (Fig. 07). Make sure that the screw at the bottom of the rear
cover fits in the hole at the bottom of the front cover.
08) The Parcan 64 Short is now ready to use.
Ordercode: 30416/30417
Fig. 03
Fig. 05
9
Fig. 04
Fig. 06
Fig. 07
Advertisement
Table of Contents
