Section 4 − Specifications; Serial Number And Rating Label Locations; Weld, Power, And Engine Specifications; Dimensions, Weights, And Operating Angles - Miller Big Blue 500 Pro Owner's Manual
The serial number and rating information for this product is located on the right side. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
4-2. Weld, Power, And Engine Specifications
.
This equipment will deliver rated output at an ambient air temperature up to 1045F (405C).
Welding
Weld Output
Mode
Range
Big Blue 600 Models:
20 − 600 A
CC/DC
Big Blue 500 Models:
20 − 500A
CV/DC
13 − 50 V
4-3. Dimensions, Weights, And Operating Angles
Dimensions
54 in. (1372 mm)
Height
(to top of exhaust)
28.5 in. (724 mm)
(mtg. brackets turned in)
Width
31.06 in. (789 mm)
(mtg. brackets turned out)
Depth
69.5 in. (1765 mm)
A
69.5 in. (1765 mm)
B*
57.9 in. (1470 mm)
C*
46.375 in. (1178 mm)
D*
11.5625 in. (294 mm)
E
27.5 in. (699 mm)
F
1.155 in. (29 mm)
G
29.81 in. (757 mm)
9/16 in. (14 mm) Dia.
H
4 Holes
*
With mounting brackets in center
position. Dimensions vary with
location of mounting brackets.
Weight
No fuel: 1750 lb (793.8 kg)
Lifting Eye Weight Rating:
2500 lb (1134 kg) Maximum
4-4. Environmental Specifications
A. IP Rating
This equipment is designed for outdoor use. It may be stored, but is not intended to be used for welding outside during precipitation unless
.
Complete Parts List available at www.MillerWelds.com