Using Your Dishwasher; Loading The Salt Into The Softener - Kernau KDI 4872 Instruction Manual

CHAPTER 3: USING YOUR DISHWASHER
Before using your dishwasher:
1. Set the water softener

2. Loading the salt Into the softener

3. Loading the basket
4. Fill the dispenser
NOTE:
Please check the section 1 "Water Softener" of Chapter 9. If you need to set the water
softener.
3.1. Loading The Salt Into The Softener
If your model does not have any water softener, you may skip this section. Always use
salt intended for dishwasher use.
The salt container is located beneath the lower basket and should be filled as explained
in the following:
WARNING:
• Only use salt specifically designed for dishwashers use!
Every other type of salt not specifically designed for dishwasher use, especially table
salt, will damage the water softener. In case of damages caused by the use of unsuitable
salt the manufacturer does not give any warranty nor is liable for any damages caused.
• Only fill with salt before running a cycle.
This will prevent any grains of salt or salty water, which may have been spilled, remaining
on the bottom of the machine for any period of time, which may cause corrosion.
Please follow the steps below for adding dishwasher salt:
Inside Outside
EN
55