Kernau KDI 4872 Instruction Manual page 81

Place objects in the dishwasher in following way:
• Items such as cups, glasses, pots/pans, etc. are faced downwards.
• Curved items, or ones with recesses, should be loaded aslant so that water can run
off.
• All utensils are stacked securely and can not tip over.
• All utensils are placed in the way that the spray arms can rotate freely during
washing.
• Load hollow items such as cups, glasses, pans etc. With the opening facing
downwards so that water cannot collect in the container or a deep base.
• Dishes and items of cutlery must not lie inside one another, or cover each other.
• To avoid damage, glasses should not touch one another.
• The upper basket is designed to hold more delicate and lighter dishware such
as glasses, coffee and tea cups.
• Long bladed knives stored in an upright position are a potential hazard!
• Long and/or sharp items of cutlery such as carving knives must be positioned
horizontally in the upper basket.
• Please do not overload your dishwasher. This is important for good results and for
reasonable consumption of energy.
NOTE:
Very small items should not be washed in the dishwasher as they could easily
fall out of the basket.
Removing the dishes
To prevent water dripping from the upper basket into the lower basket, we recommend
that you empty the lower basket first, followed by the upper basket.
WARNING:
Items will be hot!
To prevent damage, do not take glass and cutlery out of the dishwasher
for around 15 minutes after the program has ended.
EN
81