Basket Used Tips - Kernau KDI 4872 Instruction Manual

Table of Contents

Advertisement

Available languages

Available languages

1. Remove the lower basket and unscrew the reservoir cap.
2. Place the end of the funnel (supplied) into the hole and pour in about 1.5kg
of dishwasher salt.
3. Fill the salt container to its maximum limit with water, It is normal for a small
amount of water to come out of the salt container.
4. After filling the container, screw back the cap tightly.
5. The salt warning light will stop being after the salt container has been filled with
salt.
6. Immediately after filling the salt into the salt container, a washing program should
be started (We suggest to use a short program). Otherwise the filter system,
pump or other important parts of the machine may be damaged by salty water.
This is out of warranty.
NOTE:
• The salt container must only be refilled when the salt warning light (
control panel comes on. Depending on how well the salt dissolves, the salt warning
light may still be on even though the salt container is filled.
• If there is no salt warning light in the control panel (for some Models), you can
estimate when to fill the salt into the softener by the cycles that the dishwasher has
run.
• If salt has spilled, run a soak or quick program to remove it.

3.2. Basket Used Tips

Adjusting the upper basket
Type: 1
The height of the upper basket can be easily adjusted to accommodate taller dishes
in either the upper or lower basket.
To adjust the height of the upper rack, follow these steps:
EN
56
) in the

Advertisement

Chapters

Table of Contents
loading

Table of Contents