Built-In Installation (For The Integrated Model) - Kernau KDI 4872 Instruction Manual

5.6. Built-In Installation (for the integrated model)

Step 1. Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hoses
and power cord.
Illustrations of cabinet dimensions and installation position of the dishwasher.
• Less than 5 mm between the top of dishwasher and cabinet and the outer door
aligned to cabinet.
• If dishwasher is in stalled at the corner of the cabinet, there should be some
space when the door is opened.
NOTE:
Depending on where your electrical
outlet is, you may need to cut a hole in
the opposite cabinet side.
90 °
Electrical, drain
820mm and water supply
line entrances
580mm
Space between cabinet Space between cabinet
bottom and floor bottom and floor
for 60cm model
600 mm(
mm for 45cm model
450 (
90 °
80
100
)
)
Dishwasher Cabinet
Door of
dishwasher
Minimum space
of 50mm
EN
67