11: Error Codes - Kernau KDI 4872 Instruction Manual

If there is a malfunction, the dishwasher will display error codes to identify these:
Codes
E1
E3
E4
E8
E9
WARNING:
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the water should
be removed before restarting the dishwasher.
CHAPTER 11: ERROR CODES
Meanings
Longer inlet time.
Not reaching required
temperature.
Overflow.
Failure of orientation
of distributary valve.
Keep pressing a button
more than 30 seconds.
Possible Causes
Faucets is not opened,
or water intake is
restricted, or water pressure
is too low.
Malfunction of heating
element.
Some element
of dishwasher leaks.
Open circuit or break
of distributary valve.
Water or something on the
button.
EN
89