Safety Instructions; Technical Specifications - ACME STAGE PAR 100 COLOUR IP User Manual

1. Safety Instructions

Please read the instruction carefully which includes important
information about the installation, usage and maintenance.
WARNING
 Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure
that they also receive this instruction booklet.
 Please unpack and check carefully there is no transportation damage before using the fixture.
 Please disconnect main power before servicing and maintenance.
 The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces. Be sure that no ventilation slots are blocked.
 The maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher
than this.
 DO NOT connect the device to any dimmer pack.
 The housing must be replaced if they are visibly damaged.
 Unit surface temperature may reach up to 60℃. Don't touch the housing bare-hand during its
operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing
or serving.

Stop using the fixture immediately and disconnect the power source for inspection if the fixture fails.
Do not repair it by yourself if you are non-professional technician. For any help, please contact your
nearest authorized sales or technical center.

2. Technical Specifications

 4/6/7/8 channel Mode;
 Dimmer, Strobe;
2D