Safety Instructions - ACME STAGE PAR 600 ZOOM IP User Manual

Hide thumbs Also See for STAGE PAR 600 ZOOM IP:
Table of Contents

Advertisement

1. Safety Instructions

Please read the instruction carefully which includes important information
WARNING
Please keep this User Manual for future consultation. If you sell the unit to another user, be sure
that they also receive this manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The dealer
will not accept liability for any resulting defects or problems.
Unpack and check carefully to ensure that there is no transportation damage before using the
unit.
This product is suitable for wet locations. Do not immerse in water.
DO install and operate by qualified operator.
DO NOT allow children to operate the fixture.
Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head
only.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.
Before operation, ensure that you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product's specification label.
It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃. Do not
operate this product at a lower or higher temperature.
DO NOT connect the device to any dimmer pack.
Keep flammable materials away from the fixture while operating to avoid fire hazard.
Make sure the power cord is not crimped or damaged; replace it immediately if damaged.
Unit's surface temperature may reach up to 85℃. DO NOT touch the housing bare-handed
during its operation.
about the installation, usage and maintenance.
2D

Advertisement

Table of Contents
loading

Table of Contents