ACME STAGE PAR 100 COLOUR IP User Manual page 9

Display Inverse
Select the , press the ENTER button. Use the DOWN and UP button to select
Normal) or
mode without any change after 8 seconds automatically. Back to the functions without any change press
the MENU button again.
White Balance
Select the , press the ENTER button. use the DOWN and UP button to select
/ /
setup or automatically exit menu mode without any change after 8 seconds. To go back to the functions
without any change press the MENU button
Manual mode
Select the , press the ENTER button. Use the DOWN and UP button to select
RED(R000-R255)/
the brightness (d000-d255)or
button to setup or exit menu mode without any change after 8 seconds automatically. Back to the
functions without any change press the MENU button again.
Auto Test
Select the , press the ENTER button and the unit will run self-test by built-in program. To go back
to the functions press the MENU button again. Hold and press the MENU button about one second or
wait for one minute to exit the menu mode.
Temperature Display
(Display Inverse). Once selected, press the ENTER button to setup or exit menu
, You can choose values between 125-255,and press the ENTER button to
GREEN(G000-G255)/ BLUE(B000-B255)/
strobe(S000-S255). Once selected, press the ENTER
8D
(Display
AMBER(A000-A255)/