Slanted Printout; Solving Print Quality Problems - Epson WorkForce Pro WF-M5399 User Manual

Parent topic:
Related references
Paper or Media Type Settings - Printing Software
Related tasks
Selecting the Paper Settings for Each Source - Control Panel
Loading Paper in the Paper Cassettes and Rear Paper Tray

Slanted Printout

If your printouts are slanted, try these solutions:
• Make sure the paper is loaded in the correct direction.
• Make sure your paper meets the specifications for your product.
• Do not load more than the recommended number of sheets.
• Slide the edge guides against the edges of the paper.
• Make sure the paper type setting matches the type of paper you loaded.
• Select a higher print quality setting in your printer software.
• Turn off any high speed settings in your product software.
• Align the print head.
• Adjust the print quality.
• If aligning the print head did not improve the quality, disable the Bidirectional Printing setting.
• Make sure the product is not printing while tilted or at an angle.
Parent topic:
Related references
Paper or Media Type Settings - Printing Software
Related tasks
Selecting the Paper Settings for Each Source - Control Panel
Loading Paper in the Paper Cassettes and Rear Paper Tray

Solving Print Quality Problems

Check these sections if your printouts have problems with print quality, but your image looks fine on your
computer screen.
Solving Page Layout and Content Problems
Solving Page Layout and Content Problems
249