Slanted Printout; Solving Print Quality Problems - Epson WF-M5899 User Manual

Slanted Printout

If your printouts are slanted, try these solutions:
• Make sure the paper is loaded in the correct direction.
• Make sure your paper meets the specifications for your product.
• Do not load more than the recommended number of sheets.
• Slide the edge guides against the edges of the paper.
• Make sure the paper type setting matches the type of paper you loaded.
• Select a higher print quality setting in your printer software.
• Turn off any high speed settings in your product software.
• Align the print head.
• Adjust the print quality.
• If aligning the print head did not improve the quality, disable the Bidirectional Printing setting.
• Make sure the product is not printing while tilted or at an angle.
Parent topic:
Related references
Paper Specifications
Paper or Media Type Settings - Printing Software
Related tasks
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - Mac
Loading Paper in the Paper Cassettes and Rear Paper Tray
Aligning the Print Head Using the Product Control Panel
Adjusting the Print Quality Using the Product Control Panel
Selecting the Paper Settings for Each Source - Control Panel

Solving Print Quality Problems

Check these sections if your printouts have problems with print quality, but your image looks fine on your
computer screen.
Note: When printing using AirPrint, the available print settings are different from those covered in this
manual. See the Apple website for details.
Solving Page Layout and Content Problems
369