Epson WorkForce Pro WF-M5399 User Manual page 70

Option Available
settings
Pitch 0.44 to 99.99 cpi
Height 4.00 to 999.75 pt
Symbol Set Various
Form 5 to 128 lines
CR Function CR
CR+LF
LF Function LF
CR+LF
Paper Source Assign 4
4K
5S
PS Menu
Option Available
settings
Error Sheet On/Off
Description
Selects the default font pitch if the font is scalable and
fixed-pitch (availability depends on font source and
number settings)
Selects the default font height if the font is scalable and
proportional (availability depends on font source and
number settings)
Selects the default symbol set. If the selected font is not
available for the selected symbol set, the font source
and number are replaced with IBM-US (the default
setting).
Sets the number of lines for the selected paper size and
orientation. Changes the line spacing (VMI) stored in
the printer. Later changes in page size or orientation
cause changes in the Form value based on the stored
VMI.
Selects the line feed command when printing with a
driver from a specific operating system
Makes the paper source select command compatible
with HP LaserJet 4
Makes the paper source select command compatible
with HP LaserJet 4000, 5000, and 8000
Makes the paper source select command compatible
with HP LaserJet 5S
Description
Prints a sheet showing the status when errors occur
during PostScript or PDF printing
70