Epson WF-M5799 Start Here

WF-M5799
Start Here
IMPORTANT: Before using this product, make sure you read these
instructions and the safety instructions in the online User's Guide.
Note: This printer is designed for use with Epson
not third-party ink. For important ink information, visit
www.latin.epson.com/tintaepson or see your printer box.
Important Safety Instructions:
should always follow basic safety precautions to reduce the risk of fire,
electric shock, and personal injury, including the following:
• Do not use the Epson product near water.
• Always keep this guide handy.
• Avoid using a telephone during an electrical storm. There may be a
remote risk of electric shock from lightning.
• Do not use a telephone to report a gas leak in the vicinity of the leak.
Caution: To reduce the risk of fire, use only a No. 26 AWG or larger
telecommunication line cord.
1
Unpack
Warning: The product is heavy and should be lifted and moved by
two people.
1
Remove all protective materials from the product.
2
Lift up the scanner unit and remove all protective materials
from inside the product, then close the scanner unit.
ink packs only,
®
When using telephone equipment, you
3
Insert the output tray, then set it down gently.
2
Turn on and configure
1
Connect the power cord to the back of the product and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2
Turn on the product.
3
Select your language, country, and time on the LCD
screen.
Note: You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
3
Install ink supply unit
(ink pack)
Note: The included initial ink pack is designed for reliable printer setup
and cannot be used as a replacement pack or resold. After setup, the
remaining ink is available for printing.
Caution: Keep ink packs out of the reach of children and do not drink
the ink.
1
Unlock and open the ink pack tray cover, then remove the
packing material.